Starlink Mini 12V/24V to 30V/48V DC Power Booster (IP68)

Runs your Starlink Mini properly off your 12V or 24V setup.

This unit steps up your battery power to what the Starlink Mini actually needs, so you’re not stuck trying to make low-voltage gear do a high-voltage job.

Perfect for 4WDs, caravans, campers and any off-grid setup where reliable internet matters.

Built for real conditions, not the garage.

Fully sealed, handles heat, dust, corrugations and wet weather, and gives you a clean, stable output without messing around with custom wiring or unreliable converters.

It’s simple to install, holds steady under load, and just does the job every time you turn it on.

• Steps up 12V or 24V power to run Starlink Mini properly
• Keeps voltage stable to avoid dropouts and interruptions
• Plug and play wiring straight to your battery
• No cutting or crimping required out of the box
• Handles heat, dust, rain and rough tracks
• Fully sealed housing for long-term outdoor use
• High efficiency design reduces battery drain
• Built-in protection for safer off-grid power use
• Clean, simple install with minimal setup time
• Ideal for 4WD touring, caravans and remote setups

• Starlink Mini systems
• 12V vehicle setups
• 24V vehicle setups
• Dual battery systems
• Caravans and camper trailers
• 4WDs and touring vehicles
• Ute tub control boards
• Off-grid power systems
• Remote monitoring setups

Specifications

• Input voltage 10–30V DC
• Output voltage boosted to suit Starlink Mini requirements
• Efficiency greater than 95%
• Protection rating IP68
• Operating temperature -40°C to 80°C
• Material aluminum alloy
• Cooling natural convection fanless

Dimensions:

• Input cable length 20cm
• Output cable length 30cm

Quick and straightforward install with no cutting or custom wiring required.

• Connect red eyelet to battery positive terminal
• Connect black eyelet to battery negative terminal
• Run output lead to your Starlink Mini power input
• Secure the unit in a stable, dry mounting position
• Double check polarity and connections before powering on

• Suits 12V and 24V DC battery systems only
• Designed specifically to power Starlink Mini
• Not compatible with AC power sources
• Direct battery connection via 6mm eyelets required
• Plug and play setup no crimping needed
• Ensure correct polarity positive to red negative to black
• Mount in a secure location away from moving parts
• P68 rated but avoid prolonged submersion where possible
• Ensure adequate airflow around unit for heat dissipation
• Operating range suitable for extreme outdoor conditions
• Use appropriate fusing between battery and unit
• Not designed for use with damaged or unstable batteries
• Check all connections are tight before powering on

Important Notes

• Actual product color may vary slightly due to monitor brightness settings
• Manual measurement tolerance may apply
• This unit is designed for DC systems only
• Not responsible for incorrect wiring or third-party rig setups, please reach out if you’re unsure before connecting
  

• 1 x Starlink Mini DC Power Booster unit
• Pre-wired 20cm input cable with 6mm eyelet terminals
• 30cm output lead (18AWG)