Toyota, Suzuki Jimny & Subaru OEM-Style STARLINK Push Switch

Simple, factory-style control for your Starlink or 12V setup.

This OEM-style push switch gives you a clean way to control your accessories from the dash, without clutter or dodgy aftermarket switches. It’s designed to fit Toyota, Suzuki Jimny, and Subaru dashboards that use the 32.5 × 22 mm switch opening, making it a straightforward upgrade for touring and off-grid builds.

It’s made for people running Starlink, DC-DC chargers, routers, or similar accessories in 4WDs, caravans, and overland setups. You get a proper factory look, with the reliability needed for long trips and rough conditions.

The switch features a laser-etched STARLINK icon that won’t wear off, along with dual blue LEDs for clear status and dash illumination. It’s designed to trigger a relay, keeping your wiring safe and your setup protected.

• Clean factory-style switch for a seamless dash fit
• Designed for 32.5 × 22 mm cut-outs for correct OEM compatibility
• Ideal way to control Starlink and other 12V accessories
• Relay trigger design protects switch and vehicle wiring
• Dual LED setup shows power status and dash illumination
• Laser-etched icon won’t fade with heat or use
• Clip-in installation with no trimming required
• Includes wiring pigtail for easier setup
• Built to handle vibration and rough touring conditions
• Suits 4WDs, caravans, and off-grid electrical setups
• Rated 3A at 12V for safe, reliable control circuit use
• Helps keep your dash clean and free of cluttered switches
• Simple, practical solution for real-world touring installs

Designed to suit vehicles using the 32.5 × 22 mm Toyota, Suzuki & Subaru switch cut-out:

Toyota:

• Camry (2011–2014)
• Corolla (2006–2013)\FJ Cruiser (Roof console only – 2011–2016)
• Fortuner (2015–Current)
• HiAce (2014–Current)
• Hilux GUN Series (09/2015–Current)
• Kluger (2008–2019)
• LandCruiser 200 Series (2008–Current)
• LandCruiser 79 Series (Plastic dash – RHS of steering wheel,
• 2021–Current)
• Prado 150 Series (2010–Current)
• RAV4 (2006–2019)
• Tundra (2007–2014)

Suzuki:

• Jimny JB64W / JB74W (2018–Current)
• Subaru
• 86 / Subaru BRZ / Scion FR-S (2012–2020)

Always check switch hole size before ordering — this version is NOT the 22 × 22 mm Toyota switch but the 32.5 x 22 mm rectangular switch opening.

Factory Fit for Toyota, LandCruiser Suzuki Jimny & Subaru Dash Panels
The 4x4LAB STARLINK Push Switch (9C93B style) is an OEM-size ON / OFF latching switch designed to suit Toyota and Suzuki dashboards that use the 32.5 × 22 mm rectangular switch opening.

Featuring a laser-etched STARLINK icon and dual blue LED illumination, this switch delivers a clean, factory look while giving you reliable control over your Starlink system or 12V accessories, no ugly aftermarket switches, no drilling, no compromises.

Suitable for:

• Starlink power switching
• DC-DC charger control circuits
• Router and modem power control
• Touring, overlanding, and off-grid setups

Specifications:

• Rated voltage: 12V
• Current rating: 3A
• Switch type: ON / OFF latching
• LED type: Dual blue LED
• Illumination: Upper LED (ON indicator), lower LED (dash illumination)
• Application: Relay trigger switch
  

Dimensions:

• Face size: 32.5 mm × 22 mm
• Switch depth: approx. 40 mm
• Fitment: OEM rectangular dash cut-out (32.5 × 22 mm)

This is a direct-fit OEM-style switch designed for simple installation into compatible dash panels.

Installation:

1. Confirm your vehicle has a 32.5 × 22 mm switch opening
2. Disconnect vehicle battery before installation
3. Insert switch into the dash cut-out until it clips securely into place
4. Connect wiring pigtail to the rear of the switch
5. Wire the switch to a relay trigger circuit (not direct load)
6. Connect upper LED to switched power for ON indication if required
7. Connect lower LED to dash illumination circuit if desired
8. Reconnect battery and test switch operation

Important Electrical Note
This switch is rated at 3A and is designed to trigger a relay only.
All accessories must be wired through a fused relay to prevent damage to the switch or vehicle wiring.

• Designed for Toyota, Suzuki Jimny, and Subaru dashboards using the 32.5 × 22 mm switch cut-out
• Not compatible with 22 × 22 mm Toyota switches
• Must confirm switch hole size before ordering
• Clip-in fit for OEM-style dash panels with no trimming required
• Rated at 3A @ 12V, intended to trigger a relay only
• All connected accessories must be wired through a fused relay
• Not designed to directly power high-draw devices
• Dual LED setup requires correct wiring for illumination and active indication
• Suitable for 12V vehicle systems only
• Built for vibration, heat, and off-road touring conditions
• Ensure proper mounting depth clearance of approx. 40 mm behind panel
• Keep wiring secure and away from moving or hot components

• 1 × 4x4LAB STARLINK Push Switch (9C93B Style, Blue LED)
• 1 × Wiring Pigtail / Plug Connector