Starlink Mini Ryobi ONE+ 18V Battery Adapter (DC Power Cable)

Power your Starlink Mini anywhere using your existing Ryobi 18V ONE+ batteries.

This compact, plug-and-play adapter delivers reliable off-grid power without inverters, generators or hard wiring. Just click in your battery, connect, and you’re good to go.

Built tough for real-world use, it features a durable housing, on/off switch and heavy-duty cable for consistent performance across camping, worksites and remote setups. A simple, portable solution for staying connected wherever you are.

• Powers Starlink Mini directly from Ryobi ONE+ 18V batteries
• Plug-and-play setup with no wiring, inverter or booster required
• Delivers direct DC power for efficient, reliable performance
• Compatible with most Ryobi ONE+ 18V battery models
• Built-in on/off switch for easy power control
• Durable ABS housing for impact resistance and outdoor use
• Heavy-duty 18AWG copper cable to reduce voltage drop
• 1m cable length for flexible setup positioning
• Compact, portable design for off-grid and mobile use
• Ideal for camping, 4WD touring, worksites and emergency backup

Designed to suit most Ryobi 18V ONE+ batteries including:

• P102
• P103
• P104
• P105
• P107
• P108
• P109
• P189–P197 series
• PBP002–PBP006
• RB18L50
• BPL-1815
• BPL-18152
• BPL-1820G

Most 18V ONE+ Lithium, NiMH & Ni-CD batteries

(Not compatible with Ryobi 36V systems.)

Specifications:

• Compatible Device: Starlink Mini only
• Battery Platform: Ryobi ONE+ 18V
• Cable Length: 1 metre (3.28 ft)
• Wire Gauge: 18 AWG Copper
• Housing: Impact-resistant ABS
• Switch: Built-in on/off
• Installation: Plug & play

Expected Runtime:

Runtime depends on battery size, signal strength and usage.

• 2.0Ah: ~1.5 hours
• 4.0Ah: ~2.5 hours
• 5.0Ah: ~3 hours
• 6.0Ah: ~4+ hours

Starlink Mini draws higher power during startup, reconnection and heavy data use. Battery age and internal protection systems may affect runtime.

For extended sessions, keep spare batteries charged and swap as needed.

Effort required:

1/5 — Very Easy

Installation:

1. Slide your Ryobi 18V battery into the adapter
2. Plug the DC connector into your Starlink Mini
3. Switch on and connect

No tools. No wiring. No setup time.

• Designed for Ryobi ONE+ 18V batteries only (not compatible with 36V systems)
• Compatible with most 18V ONE+ Lithium, NiMH and Ni-CD batteries
• Designed specifically for Starlink Mini (not suitable for Gen 2 / Gen 3 dishes)
• Plug-and-play use – no wiring or installation required
• Connects via DC barrel plug directly to Starlink Mini
• Built-in on/off switch controls power without removing battery
• Runtime varies based on battery capacity, signal strength and usage
• Best suited for portable, off-grid and temporary setups
• Not waterproof – keep protected from heavy rain and submersion
• Ensure battery is properly charged before use for stable performance

Included:

• Starlink Mini Ryobi ONE+ 18V Battery Adapter
• 1m Heavy-Duty 18AWG DC Power Cable
  

Not Included:

• Starlink Mini and Ryobi battery not included