Starlink Mini Car Charger Cable | 12V-48V Power | 4x4 LAB

Keep your Starlink Mini powered straight from your vehicle, no setup headaches.

This 4x4 LAB Starlink Mini 12V–48V Car Charger Cable is designed to run your Starlink Mini directly from a vehicle’s cigarette lighter outlet. It’s made for 4WDs, caravans, RVs, and off-grid rigs where reliable power matters more than complicated installs. Built with heavy-duty copper wiring and a wide voltage range, it helps maintain stable power delivery even on longer cable runs. Whether you’re parked up in camp or moving between remote stops, it’s made to keep your connection steady without needing extra gear or hardwiring.

A built-in fuse and multi-protection system helps protect both your Starlink Mini and your vehicle’s electrical system. Combined with a plug-and-play setup, it keeps things simple so you can just plug in and go. Designed for real-world use in harsh Australian conditions, it’s a straightforward way to keep your Starlink running wherever the track takes you.

• Direct Starlink power runs Mini from vehicle
• Plug and play setup no wiring required
• Wide voltage compatibility works 12V to 48V
• Built in fuse protection safeguards your system
• Multi protection circuit prevents electrical faults
• Vehicle ready design fits cigarette outlets
• Off grid reliability built for remote travel
• Flexible cable options from 1m to 10m lengths

• Starlink Mini systems
• 12V, 24V, and 48V vehicle electrical systems
• Cars, 4WDs, SUVs, trucks, and RVs
• Overlanding and off-grid touring setups
• Accessory power outlets (cigarette lighter sockets)
• Not compatible with direct mains AC power
• Works with standard Starlink Mini DC input configuration

Power Requirements

This cable is designed for direct 12V systems and works reliably with short to medium cable runs.

Specifications:

• Input Voltage: DC 12V–48V
• Wire Type: Heavy-duty copper core
• Connector A: Cigarette lighter plug (male)
• Connector B: 5.5mm x 2.1mm DC barrel jack (male) with waterproof gasket
• Protection: Over-current, over-voltage, short-circuit
• Operating Temperature: -20°C to 60°C
• Cable Length Options: 1m, 2m, 3m, 5m, 10m
• Voltage drop: approx 0.2V at 5A load (tested)
  

Dimensions:

• Cable length options: 1m / 2m / 3m / 5m / 10m
• Connector size: Standard 12V cigarette plug
• DC connector: 5.5mm x 2.1mm barrel jack

This is a simple plug-and-play power cable designed for fast setup in any vehicle.

Installation:

1. Plug the cigarette lighter connector into your vehicle’s 12V–48V outlet
2. Connect the DC barrel jack to the Starlink Mini power input
3. Ensure the connection is firmly seated with the waterproof gasket engaged
4. Route cable through cabin or mounting points as needed for access and safety
5. Select appropriate cable length based on mounting position of Starlink Mini
6. No hardwiring or electrical modification required

• Works with 12V–48V vehicle cigarette lighter outlets only
• Compatible with Starlink Mini only
• Up to 3m length suitable for most standard 12V setups
• 5m length generally suitable on healthy vehicle electrical systems
• 10m length may experience voltage drop depending on battery and wiring condition
• Longer runs may benefit from a boosted power setup
• Plug must be fully seated in outlet for stable power delivery
• Not designed for permanent hardwiring into fuse box or battery terminals
• Ensure outlet is rated for continuous accessory power use
• Avoid running cable through sharp edges or high-heat engine areas

• 4x4 LAB Starlink Mini 12V–48V car charger DC power cable
• Cigarette lighter plug (male)
• 5.5mm x 2.1mm DC barrel jack (male) with waterproof gasket
• Built-in replaceable fuse system