Starlink Mini IP67 Waterproof Power Outlet

Not all 12V sockets are built the same.

This isn’t a basic caravan outlet. It’s a true waterproof solution, purpose-built for Starlink Mini and engineered for harsh Australian conditions. Designed for caravans, canopies, 4WD builds and off-grid setups that demand a clean install with zero compromise.

IP67 sealed when plugged in and protected by a cap when not, it’s built to handle dust, water and vibration. But where it really stands out is internal depth, designed so the Starlink Mini cable gasket seats fully inside the housing.

That means a proper compression seal, better strain support, no exposed rubber, and no weak partial engagement. No loose fit, no compromised seal, and far less risk of water ingress or damage from a knock.

This isn’t just about waterproofing. It’s about protecting your setup properly.

• IP67 waterproof (sealed when in use + capped when not)
  Designed for proper Starlink Mini cable gasket fit
  Full compression seal with secure connection
• Built to resist vibration, knocks and movement
• Durable housing for harsh Australian conditions
• Copper pins for consistent power transfer
• Compatible with 12V / 24V, AGM, lithium and solar
• Suits caravans, 4WDs, canopies and campervans
• Flush mount design for a clean instal
• 27mm hole size (up to 55mm wall thickness)
• Simple 2-wire installation
• Helps protect your Starlink from water, dust and damage
  

• Starlink Mini (standard cables)
• 12V & 24V systems
• AGM, Lithium, Solar setups
• Caravan, 4WD, RV, Canopy, Motorhome installs

Specifications:

• Input: 12V / 24V DC
• Fuse recommended: 10A

Basic wiring required (positive + negative to battery or distribution block).

Dimensions:

• Hole size: 27mm threaded body
• Max wall thickness: 55mm
• Body length: 66mm

Installation:

• Drill a 27mm hole to suit the threaded body
• Install into panel (caravan, canopy, wall or similar surface)
• Secure using mounting hardware (flush mount plate optional)
• Connect positive (+) and negative (–) to battery or distribution block
• Use a 10A fuse on the circuit
• Plug in Starlink Mini cable
• Ensure cable gasket is fully seated inside the outlet for proper seal

• Requires 27mm mounting hole
• Suitable for panels up to 55mm thickness
• Ensure enough clearance behind surface for 66mm body length
• Designed for fixed panel installation (not loose or inline use)
• Compatible with Starlink Mini standard cable
• Designed for 12V / 24V DC systems only
• Suitable for caravans, 4WDs, canopies, campervans and motorhomes
• For full waterproof performance, ensure the cable gasket is fully seated
• Always keep cap closed when not in use to maintain seal
• Best suited for permanent power setups, not temporary connections

• 1x 4x4LAB Starlink Mini Boosted IP67 Power Outlet
• 1x Waterproof Cap
• Mounting hardware
• Optional flush mount plate (if selected)