Product details

Key Features

The 4x4LAB 128Wh Rear-Mounted Battery Pack transforms your Starlink Mini into a self-contained, portable internet system. With a powerful 35,000mAh rechargeable battery, 60W power rating and up to 6 hours of estimated runtime, enjoy off-grid connectivity without relying on vehicle power, mains electricity or bulky external power stations.

Designed specifically for Starlink Mini, the battery attaches directly to the back of your dish for a clean, compact and integrated setup. Perfect for 4WD adventures, camping, caravanning, remote working and emergency backup, it gives you the freedom to stay connected wherever you go.

No separate power stations. No complicated wiring. Just portable internet, made simple.

128Wh High-Capacity Battery

With 35,000mAh (128Wh) of rechargeable power, enjoy extended connectivity wherever your adventures take you. Keep your Starlink Mini running without being tied to your vehicle or an external power source.

  • High-capacity 128Wh rechargeable battery
  • 60W power rating for Starlink Mini
  • Up to approximately 6 hours of estimated runtime under favourable conditions
  • Ideal for portable and off-grid internet setups

Up to 6 Hours of Off-Grid Runtime

Stay connected for hours without needing an external power supply. With its high-capacity rechargeable battery, enjoy extended Starlink Mini operation whether you're working remotely, streaming at camp or exploring off-grid.

Estimated Operating Times:

Starlink Mini Power Consumption
Estimated Runtime Low Consumption (20W) 5–6 hours
Light Everyday Use (25W) 4–4.5 hours
Moderate Consumption (30W) 3.4–3.8 hours
Higher Consumption (40W) 2.5–3 hours

Typical use: Approximately 2.5–4.5 hours, with longer runtime possible under favourable, low-power conditions.

Runtime estimates are calculated from the 128Wh battery capacity, typical Starlink Mini power consumption and expected energy losses. Actual performance will vary depending on usage, temperature, signal conditions, battery condition and efficiency. Figures are estimates, not guaranteed or independently verified 4x4LAB test results.

Integrated Rear-Mounted Design

Designed specifically to fit your Starlink Mini, this battery attaches directly to the rear of the dish, keeping your power supply and internet setup together.

  • Compact, integrated design
  • No separate power bank to carry
  • Direct power connection without loose cables between the battery and Starlink Mini
  • Clean setup without bulky external equipment
  • Convenient for travel and off-grid adventures

One dish. One battery. Complete freedom to connect.

Pass-Through Charging – Stay Connected While Recharging

Keep your Starlink Mini powered even while replenishing your battery.

With pass-through charging support, you can connect a compatible external charging source to recharge the battery while it continues supplying power to your Starlink Mini.

Ideal for longer off-grid setups where vehicle or mains power becomes available, allowing you to extend your connection without needing to disconnect the battery from your dish.

  • Charge the battery while powering your Starlink Mini
  • Maintain your internet connection during charging
  • Convenient for longer camping and remote working setups
  • Compatible external power source and charging cable required

Charging performance depends on the connected power supply and Starlink Mini power consumption. Use a suitable charger within the battery's specified input ratings.

Go Anywhere. Connect Anywhere.

Forget being limited by the nearest power point or vehicle socket. With battery power attached directly to your Starlink Mini, you can position your dish wherever it has a clear view of the sky.

  • Set up away from your vehicle or caravan
  • Ideal for camping, 4WD touring and remote working
  • No permanent installation required
  • Portable power wherever you need connectivity

Features:

  • 35,000mAh (128Wh) rechargeable battery capacity
  • Up to 6 hours of estimated runtime under favourable conditions
  • Approximately 2.5–4.5 hours of typical off-grid operation
  • 60W power rating designed for Starlink Mini
  • Direct rear-mounted design for an integrated setup
  • Pass-through charging support – recharge while powering your Starlink Mini
  • Direct DC connection without loose cables during battery operation
  • Turns Starlink Mini into a self-contained, battery-powered internet system
  • No external power station or inverter required during battery operation
  • Compact design reduces separate equipment and clutter
  • Flexible positioning away from vehicle or mains power
  • Rechargeable for repeated off-grid adventures
  • Designed specifically for Starlink Mini
  • Ideal for camping, caravanning, 4WD touring and remote working
Compatibility

Compatibility & Fitment

Designed specifically for the Starlink Mini, the 4x4LAB 128Wh Rear-Mounted Battery Pack provides a clean, integrated power solution without the need for bulky external power stations or complicated wiring.

Compatible With:

  • Starlink Mini only
  • Direct rear-mounted attachment
  • Portable and off-grid Starlink Mini setups
  • Compatible external DC charging sources for pass-through ch
Dimensions & Specifications
  • Width: 19 cm
  • Height: 17 cm
  • Depth: 3.5 cm
  • Dimensions (W × H × D): 190 × 170 × 35 mm
  • Battery Capacity: 35,000mAh
  • Energy Capacity: 128Wh
  • Power Rating: 60W
  • Mounting: Direct rear-mounted attachment
  • Compatibility: Starlink Mini only
Installation

Installation & Setup

Get your Starlink Mini powered up in minutes with a simple, integrated battery setup. No complicated wiring, external power stations or permanent modifications required.

How to Install:

  1. Charge Your Battery – Fully charge the battery using a compatible power supply before first use.
  2. Power Off Your Starlink Mini – Disconnect any existing power cables before attaching the battery.
  3. Attach the Battery – Align the battery with the rear mounting interface of your Starlink Mini and gently secure it into place, ensuring the integrated DC connector is correctly seated.
  4. Power Up – Switch on the battery and allow your Starlink Mini to start up.
  5. Connect & Go – Position your Starlink Mini on a stable surface with a clear view of the sky, connect to Wi-Fi and you're ready to go.

Charging & Pass-Through Use:

  • Recharge using the DC charging port on the underside of the battery and a compatible power supply.
  • Supports pass-through charging, allowing you to power your Starlink Mini while charging the battery.
  • Monitor battery status using the integrated digital display.
  • Disconnect the charging cable when you want to return to fully portable battery operation.

Important Notes:

  • Ensure the battery is securely attached before use.
  • Keep the battery dry and protected from rain and moisture.
  • Use only compatible charging equipment within the specified input ratings.
  • Designed for stationary setups; do not rely on the battery attachment to secure your Starlink Mini to a moving vehicle.

Attach. Power Up. Stay Connected. It's that simple.

Fitment & Use Notes
  • Designed specifically for Starlink Mini only
  • Slides directly onto Starlink Mini with integrated connection
  • No tools or wiring required for installation
  • Compatible with original Starlink Mini charger
  • Runtime varies based on usage, signal and environmental conditions
  • Operating temperature range: -22°C to 50°C
  • IP65 rated – resistant to dust and light rain, not submersible
  • Best used on stable, flat surfaces during operation
  • Ensure latch is fully engaged before use or transport
What's Included

What's Included

  • 1 × 4x4LAB 128Wh Slide-On Battery Pack for Starlink Mini
  • 1 × DC-to-DC Charging Cable

Please Note:

  • Starlink Mini dish is not included.
  • Additional accessories and power supplies are sold separately.

Built in the wild. Refined in the lab.

Every 4x4LAB product starts where it matters most – out on real tracks, real rigs and real trips. We test, refine and rebuild until it’s tough enough for harsh Aussie conditions and simple enough to trust anywhere.

Learn more

FAQs

Please read our FAQs page to find out more.

Where are your products made?

4X4LAB is proudly Australian owned and operated. Many of our products are designed, tested and/or made in Australia, while selected accessories are sourced from trusted overseas partners. Every product we sell is chosen for quality, reliability and real-world use.

Do you ship worldwide?

Absolutely we do! Please check our Shipping & Delivery page for more info on international shipping timeframes and rates.

Can I install this myself or do I need a professional?

Most of our customers find it easy to install our gear themselves. We work to make all of our products simple, intuitive, and with easy to navigate installation and fitment instructions. Need help? Get in touch, we'd be happy to help.

Will these products actually hold up on rough tracks?

Yep, and that’s exactly what it’s built for. Our gear is tested on corrugations, heat and long-distance trips, not just in ideal conditions. If it can’t handle that, we don’t sell it.

Didn’t find your answer?

Don't hestitate to contact us – we're here to help!